Sunlight-supply Quest Dual 110 Overhead Dehumidifier Manuel d'utilisateur télécharger pdf (Page 5)

1-800-533-7533

Quest 110 Dual Installation, Operation and Maintenance Instructions

www.QuestProtect.com

sales@QuestProtect.com

quest

Asset Protection and IAQ Solutions

quest

4. Installation

CAUTION! Remove compressor shipping tie from the unit. Failure to remove

shipping tie will cause excess vibration to be transmitted to the frame.

4.1 Remove Compressor Shipping Support

The Quest 110 Dual uses a compressor to power the refrigeration system. To protect the

compressor and refrigeration system during shipping a plastic tie wrap secures it to the

units frame. Remove the tie wrap by cutting the tie wrap and pulling from the unit as

shown. After removing tie wrap, insert plastic plugs provided into the holes.

4.2 Location

TheQuest110Dualcanbeinstalledinavarietyoflocationstomeettheowner’sneeds;otherconsiderations

include:

1. Providing access to a 115 VAC power outlet (10’ power cord is provided).

2.Locatingnearaoororothersuitabledrain.

3. Mount 4” above drain.

4. Do not install the Quest 110 Dual with the exhaust of the unit within 1’ of a wall or obstruction. Do not

place the unit near open water.

4.2A No Ducting (g. 1)

The simplest installation is to place the Quest 110 Dual with no ducting. To ensure optimal performance, the

airinletandtheoutletoftheunitmustbeatleast1’fromwallsandotherobstructionstoairow.

Input of

Humid Air

Output of

Dehumidified Air

Front View

Figure 1: Installation with no ducting.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

Sunlight-supply Quest Dual 110 Overhead Dehumidifier Manuel d'utilisateur Page 5