Sunlight-supply Titan Controls® Apollo® 3 - Fixed Cycle Timer Manuel d'utilisateur télécharger pdf

Instructions for Use

1. Mount Apollo 3 near equipment to be operated,

away from water, mist, etc.

2. Plug equipment to be controlled into the Apollo 3.

3. Do not exceed 10 amps.

4. Plug the Apollo 3 into a 120 volt outlet.

5. Equipment will cycle one (1) minute “On”

and four (4) minutes “O” until power is defeated.

6. To reset Apollo 3, unplug timer & then plug

back into outlet. Timer will always start with the

“On” cycle.

Controller Specications

Size: 4"H x 2"W x 2.5"D

Weight: 1 lb.

Voltage Input: 120 volts

Voltage Output: 120 volts

Maximum Amperage: 10 amps

Hertz: 60 Hz

On Time: 1 minute

O Time: 4 minutes

Operating Temperature: 35

to 125

F | 2

to 53

Storage Temperature: 32

to 135

F | 0

to 57

Cord Set: Wall mount

www.titancontrols.net

For technical assistance call us at

1-888-80-Titan or 1-888-808-4826.

Apollo 3

Fixed Cycle Timer

Easy Guide

Controlling a Drip Feed

Controlling an

Aeroponics System

Controlling an

Ebb & Flow System

VANCOUVER, W ASHINGTON U.S.A.

Apollo 3

1 2

Apollo 3 1

Résumé du contenu

Page 1 - Apollo 3

Instructions for Use1. Mount Apollo 3 near equipment to be operated, away from water, mist, etc.2. Plug equipment to be controlled into the Apollo 3.

Page 2

Instrucciones de uso1. Instale el Apollo 3 cerca del equipo que se pondrá en funcionamiento, lejos de atomizadores, agua, etc.2. Enchufe el equipo q

Commentaires sur ces manuels

Pas de commentaire

Sunlight-supply Titan Controls® Apollo® 3 - Fixed Cycle Timer Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Éclairage Sunlight-supply Titan Controls® Apollo® 3 - Fixed Cycle Timer. Sunlight Supply Titan Controls® Apollo® 3 - Fixed Cycle Timer User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Éclairage Sunlight-supply Titan Controls® Apollo® 3 - Fixed Cycle Timer